Author: admin@newtech

Peeler & Splitter

Newtech Peeler & Splitter. Click here to know more….

The roasted groundnuts are fed into the Groundnut Peeler & Splitter, a rotating drum presses the groundnuts towards a screen as a result groundnuts are split and skin is separated. The blower blows and separates the groundnuts from skin. Newtech Industries Mangalore is a well-known manufacturer, exporter, service provider and supplier of Groundnut Peeler & Splitter.

  • Machine comes with high efficiency blower.
  • Less noise.
  • Less breakage and ensures complete peeling of all groundnuts.
  • Available with SS-304 material.
  • Machine is very easy to clean.
  • In-built husk separator aspirating system.
  • Roller type peeling machine.
MODEL NUMBERPEELER POWERHUSK SEPARATOR POWERCAPACITY
GP – 2000.5 HP0.5 HP80 – 100 Kg
GP – 3000.75 HP1 HP150 – 200 Kg

Continue Type Roaster

Newtech Continue Type Roaster. Click here to know more….

A rotating drum is directly exposed to the fire at the bottom of the drum. It has a automatic sand separator and re-feeder which feeds sand into the machine continuously. Newtech Industries made Continue Type Roaster machine is used in roasting of ground nuts, fried gram, food grains etc.  Newtech Industries Mangalore is a well-known manufacturer, exporter, service provider and supplier of Continue Type Roaster.

  • Uniform roasting.
  • Automatic separation and re-feeding of sand.
  • It comes with Geared motor drive system.
  • Closed box which ensures less firewood requirement.
  • Easy control of oxygen for burning.
  • Available in diesel burner, gas burner or firewood as per customer requirement.
MODEL NUMBERPOWERCAPACITY
RR – 40 – 1001 HP80 – 100 Kg
RR – 60 – 1501.5 HP140 – 160 Kg
RR – 60 – 2502 HP280 – 300 Kg
RR – 60 – 3003 HP400 – 500 Kg

Batch Type Roaster

Newtech Batch Type Roaster. Click here to know more….

Drum Roaster or Batch Type Roaster is widely used for roasting of all food grains, spices, pulses, coffee beans, groundnut, fried gram, cashew, almonds and lots more. Newtech Industries Mangalore is a well-known manufacturer, exporter, service provider and supplier of Batch Type Roaster or Drum Roaster.

  • Turn ON the machine and check if the drum is rotating in proper direction and set the desired temperature.
  • Once the temperature is achieved – Fill the product inside the drum through in-feed hopper.
  • Set the time and run the machine for set time as per the data. Based on the products and moisture the time may vary from 15 to 30 minutes.
  • After the set time roasting will be done. Reverse the drum rotation & collect the roasted products from discharge outlet.
  • Uniform roasting.
  • Machine comes with temperature and time controller.
  • Available in multiple fuel option – Electric heater / LP Gas and Fire wood.
  • Easy maintenance and log life.
  • Machine can maintain temperature from 150 to 300 Degree C.
MODEL NUMBERHEATER POWERMACHINE POWER IN HPCAPACITY
DR – 4025 KW2 HP100 KG / Batch
DR – 2016 KW1.5 HP50 KG / Batch
DR – 1010 KW1 HP25 KG / Batch
DR – 68 KW1 HP15 KG / Batch
DR – 45 KW0.25 HP8 KG / Batch
DR – 33 KW0.25 HP5 KG / Batch

Groundnut Decorticator

Newtech Groundnut Decorticator. Click here to know more….

We are offering Groundnut Decorticator. Newtech Industries designed Groundnut Decorticator, specially for hulling or decorating of ground nuts. It also includes a aspirating system for removal of husk and dust.

  • High efficiency.
  • Multi controlled aspirating system.  
  • Heavy duty bearing for long life.
  • Specially punched screen.
  • High resistance blade for long life.
  • Heavy construction.

Coconut Breaker

Newtech Coconut Breaker. Click here to know more….

Coconut breaker is used for breaking or cutting of whole dry coconut into two half pieces. This machine manufactured by Newtech industries is used for temples, copra manufacturers.

Coconut breaker machine has a manual feeding system. Once the coconut is kept inside the rotating wheel. The coconut passes through the blade and cuts into two pieces. Machine is available with Single head or Double head system.

Newtech industries manufactures two variants of this machine machine based on different capacities.

Key Features

  • Coconut breaker comes with following features.
  • Easy and safe to operate.
  • Water sprayer for cleaning of coconut while cutting.
  • Water and coconut separator system.
  • Easy replacement of blade.
  • Machine is available in single and double head system.
  • Clear cutting of coconut into two half’s.

Available Variants

MODEL NUMBERPOWERCAPACITY
C0 – 201 HP x 1
2 HP x 1		1000 – 1200 Coconut / Hour
C0 – 40
1 HP x 1
3 HP x 1		2000 – 2500 Coconut / Hour

Copra Dryer

Newtech Copra Dryer. Click here to know more….

Copra Dryer is a specially designed drying unit to convert coconut into copra. This is an Air to Air tubular heat exchanger system. Where the normal atmosphere temperature enters inside the heating chamber converts into hot air and blown inside the dryer room.

We have 8 different models of the Copra Dryer based on capacity and machine power.

WORKING SYSTEM

  1. Cut the coconuts into two pieces and keep them inside one room.
  2. Fire the heat exchanger and then switch on the blower.
  3. After attaining required temperature blow hot air inside the room for 10 to 14 hours.
  4. Once it is partially dried, Remove the outer shell of the coconut.
  5. Keep the coconut inside the room for second stage drying after removing the shell.
  6. Depending on type of coconut and moisture blow hot air to dry for about 8 to 12 hours.
  7. Your copra is ready. Slice the top layer and pack as required.

Key Features

  • Easy to control and maintain required temperature.
  • Sources of fuel : Wood waste, Coconut shell, Agro waste and also coconut husk.
  • Easy maintenance and repair.
  • High pressure blower that is CFM Ranging from 1000 to 20000 CFM.
  • Heavy construction for long life.
  • Easy to clean.
  • No blockage in chimney.
  • Low fuel consumption.
  • Available from 500 coconuts to 10000 coconuts per batch.
  • Double copra drying chamber system.
  • Maximum operating temperature is 125°C

Box Copra Dryer

Newtech Box Dryer. Click here to know more….

Box Copra Dryer is used to dry fresh coconut and produce copra – Edible and milling. We can also use to dry copra and reduce the moisture percentage. It can also be used in coconut industry to dry small cut pieces and paring pieces.

  • Box Type Copra dryer is modified version of traditional copra drying system. Fire the Box Type Copra dryer machine.
  • Cut coconut into two pieces and keep them in the top chamber
  • Maintain the temperature around 80 to 90 degree centigrade
  • Run the machine for 8 to 10 hours. Keep reducing the temperature as the time progress after three to four hours maintain temperature around 80 degrees centigrade.
  • Check if it is dried if dried remove the outer shell and re-dry the copra for another 6 to 8 hours based on copra moisture percentage
  • Low fuel consumption
  • Long life easy to maintain and clean
  • Easy to operate
  • No electricity required on firewood option machine
  • Digital Temperature display.
  • Available in multiple fuel option – Electric heater and Fire wood.
MODEL NUMBERHEATER POWERFLOOR AREACAPACITY
BD – 4016 KW8 * 5800 – 1000 Coconuts / Batch
BD – 2010 KW5 * 4400 – 500 Coconuts / Batch
BD – 86 KW3.25 * 2.5150 – 200 Coconuts / Batch
BD – 44 KW3 * 1.580 – 100 Coconuts / Batch
BD – 22 KW2 * 140 – 50 Coconuts / Batch

Copra Cutter

Newtech Copra Cutter. Click here to know more….

Copra cutter is used for cutting of dry copra into small pieces for extracting of coconut oil. The dry copra fed to this machine through the hopper provided. Once the copra passes through the blade and cuts into small pieces. This copra processing machine is a great fit for coconut oil producer.

Newtech Industries manufactures Copra Cutter in 4 different variants based on different capacity

  • This copra processing machine comes with following advantages
  • Robust & Rigid construction
  • No blockage & easy cleaning
  • Achieve small size of pieces ranging from 1/2″ to 1″
  • Easy maintenance
  • Very long life blade.
  • Easy and safe to operate
MODEL NUMBERPOWERCAPACITY
CC – 2001 HP100 – 150
CC – 3002 HP300 – 500
CC – 5003 HP800 – 1000
CC – 7505 HP2000 – 3000

Dehusking Machine

Newtech Dhusking Machine. Click here to know more….

Coconut Dehusking machine or Newtech Industries Coconut Husk Remover Machine is used for peeling of coconut outer cover fiber to extract the coconut. We manufacture different capacity machines suitable for small coconut farms, to industrial use. Newtech Industries Mangalore is a well-known manufacturer, exporter, service provider and supplier of Dehusking machine or Coconut Husk Remover Machine.

  • It is easy and safe to operate.
  • Low percentage breakage of coconut.
  • It comes with portable castor wheels (on request).
  • Heavy duty gear box.
MODEL NUMBERPOWERCAPACITY
DH – 251.5 HP200 – 250 Coconuts / Hour
DH – 352 HP300 – 350 Coconuts / Hour
DH – 35C2 HP400 – 450 Coconuts / Hour

Deshelling Machine

Newtech Deshelling Machine. Click here to know more….

Newtech Industries Deshelling Machine or Coconut Shell Remover is specially designed and manufactured for removing of hard coconut shell to obtain meat ball. This is manually operated machine. One has hold the coconut and slide towards the rotating wheel to remove the hard outer shell. Newtech Industries Mangalore, is a well-known manufacturer, exporter, service provider and supplier of Deshelling Machine.

  • CNC manufactured solid plate type wheel.
  • It is easy and safe to operate. 
  • Easy to remove and adjust wheel tool.
  • Direct driven wheels with heavy gear box.
  • It comes with quick and fine adjust of cutting rod.
  • No blockage to tools in wheel.
  • Low maintenance rigid construction.
  • Coconut Shell Remover comes with Heavy duty gear box.
  • Multi head wheels available on request.
  • It has easy to open cover for cleaning and maintenance.
  • Stainless steel covers are also available on request.
MODEL NUMBERPOWERCAPACITY
DS – 3501 HP250 – 350 Coconuts / Hour