Coconut Breaker

Newtech Coconut Breaker. Click here to know more….

Coconut breaker is used for breaking or cutting of whole dry coconut into two half pieces. This machine manufactured by Newtech industries is used for temples, copra manufacturers.

Coconut breaker machine has a manual feeding system. Once the coconut is kept inside the rotating wheel. The coconut passes through the blade and cuts into two pieces. Machine is available with Single head or Double head system.

Newtech industries manufactures two variants of this machine machine based on different capacities.

Key Features

  • Coconut breaker comes with following features.
  • Easy and safe to operate.
  • Water sprayer for cleaning of coconut while cutting.
  • Water and coconut separator system.
  • Easy replacement of blade.
  • Machine is available in single and double head system.
  • Clear cutting of coconut into two half’s.

Available Variants

C0 – 201 HP x 1
2 HP x 1
1000 – 1200 Coconut / Hour
C0 – 40
1 HP x 1
3 HP x 1
2000 – 2500 Coconut / Hour

Copra Dryer

Newtech Copra Dryer. Click here to know more….

Copra Dryer is a specially designed drying unit to convert coconut into copra. This is an Air to Air tubular heat exchanger system. Where the normal atmosphere temperature enters inside the heating chamber converts into hot air and blown inside the dryer room.

We have 8 different models of the Copra Dryer based on capacity and machine power.


  1. Cut the coconuts into two pieces and keep them inside one room.
  2. Fire the heat exchanger and then switch on the blower.
  3. After attaining required temperature blow hot air inside the room for 10 to 14 hours.
  4. Once it is partially dried, Remove the outer shell of the coconut.
  5. Keep the coconut inside the room for second stage drying after removing the shell.
  6. Depending on type of coconut and moisture blow hot air to dry for about 8 to 12 hours.
  7. Your copra is ready. Slice the top layer and pack as required.

Key Features

  • Easy to control and maintain required temperature.
  • Sources of fuel : Wood waste, Coconut shell, Agro waste and also coconut husk.
  • Easy maintenance and repair.
  • High pressure blower that is CFM Ranging from 1000 to 20000 CFM.
  • Heavy construction for long life.
  • Easy to clean.
  • No blockage in chimney.
  • Low fuel consumption.
  • Available from 500 coconuts to 10000 coconuts per batch.
  • Double copra drying chamber system.
  • Maximum operating temperature is 125°C

Box Copra Dryer

Newtech Box Dryer. Click here to know more….

Box Copra Dryer is used to dry fresh coconut and produce copra – Edible and milling. We can also use to dry copra and reduce the moisture percentage. It can also be used in coconut industry to dry small cut pieces and paring pieces.

  • Box Type Copra dryer is modified version of traditional copra drying system. Fire the Box Type Copra dryer machine.
  • Cut coconut into two pieces and keep them in the top chamber
  • Maintain the temperature around 80 to 90 degree centigrade
  • Run the machine for 8 to 10 hours. Keep reducing the temperature as the time progress after three to four hours maintain temperature around 80 degrees centigrade.
  • Check if it is dried if dried remove the outer shell and re-dry the copra for another 6 to 8 hours based on copra moisture percentage
  • Low fuel consumption
  • Long life easy to maintain and clean
  • Easy to operate
  • No electricity required on firewood option machine
  • Digital Temperature display.
  • Available in multiple fuel option – Electric heater and Fire wood.
BD – 4016 KW8 * 5800 – 1000 Coconuts / Batch
BD – 2010 KW5 * 4400 – 500 Coconuts / Batch
BD – 86 KW3.25 * 2.5150 – 200 Coconuts / Batch
BD – 44 KW3 * 1.580 – 100 Coconuts / Batch
BD – 22 KW2 * 140 – 50 Coconuts / Batch

Copra Cutter

Newtech Copra Cutter. Click here to know more….

Copra cutter is used for cutting of dry copra into small pieces for extracting of coconut oil. The dry copra fed to this machine through the hopper provided. Once the copra passes through the blade and cuts into small pieces. This copra processing machine is a great fit for coconut oil producer.

Newtech Industries manufactures Copra Cutter in 4 different variants based on different capacity

  • This copra processing machine comes with following advantages
  • Robust & Rigid construction
  • No blockage & easy cleaning
  • Achieve small size of pieces ranging from 1/2″ to 1″
  • Easy maintenance
  • Very long life blade.
  • Easy and safe to operate
CC – 2001 HP100 – 150
CC – 3002 HP300 – 500
CC – 5003 HP800 – 1000
CC – 7505 HP2000 – 3000